PLEASE MESSAGE US BEFORE YOU MAKE ANY PAYMENTS FOR OUR SERVICES

Drop your bike at Blk 415 Eunos Rd 5 Singapore 400415 or we come and pick up your bike and have it serviced 

We are HOME BASED BUSINESS 

Estimated downtime 1 hr +

WE REBLEED BOTH BRAKES STRAIGHT FOR SAFETY REASONS! 

We provide Hydraulic brakes bleeding - BOTH side is $88 For Sram Guide Rsc , Tektro, Hope Tech, Avid , Hayes, Bengal , Shimano Saint/ Zee XT, Xtr etc - inclusive of New hi quality Dcbikes Pure Mineral Oil / REDLINE Dot 4 or Dot 5.1 hydraulic fluid

(WE ONLY USE PREMIUM REDLINE HYDRAULIC FLUID/ Dcbikes pure mineral oil ) or factory recommended mineral fluid + cleaning / checking of brake pads, seals and fine tuning adjustments etc) 

Bleed your 2 brakes with our premium REDLINE Hydraulic fluid ( Fully Synthetic ) or pure mineral oil / Factory recommended fluid 

Flush all your bubbles, air and old/bad fluid into new Hi grade racing fluid/ dcbikes pure mineral oil to great condition 10/10 / Subject to manufacturer recommendations for dot fluid or mineral oil.  

TAKE NOTE : WE STRICTLY FOLLOW ALL MANUFACTURERS SPECIFICATIONS 

DON'T RISK YOUR SAFETY ⚠️ 

Eliminate brake fade, spongy weak brakes into fresh new brakes again! 

DH UR BIKE TO THE EXTREME LEVEL KNOWING YOUR BRAKE IS WITHSTANDING ALL THE STRESS N HEAT , YET WORKING WELL! 

DCBIKES only use new fresh REDLINE premium hydraulic brake fluid Dot 4 or 5.1/Dcbikes ®️ pure mineral oil/ recommended fluid 

We have stocks for Shimano / Avid /Tektro / Aftermarket 160mm /180mm /203mm floating disk brakes rotors and adapters 

DOWNTIME ABT 1HR+  ( You can go paya Lebar Sq or Kinex Mall to eat, shop & relax while we service your brakes for u

Please also kindly enquiry with us for more details of this exclusive service for your bicycles with optional for our 2 way transport service pickup from your house and back to your house safely

All you need to do is relax at home/ or drop off at eunos Rd 5 and leave everything to us 

Thanks for your interest, support and trust.

Package Includes :

Left and right rebleeding service with full oil change, all point check and alignment service 

Buy Hydraulic Rebleeding Service From Dcbikes® Online Bike Store In Singapore. www.dcbikes.com.sg | The No 1 Choice For Mountain Bike, Bicycle Parts Components & Accessories Shop

E4 Power 4 Pistons Hydraulic Calipers Disc Brake Front Rear Hydraulic Two Way System Left Right Brake Lever Set For Bicycle 

🌟 Left Lever- Front Caliper Oil Tube Length: 80cm

🌟 Right Lever - Rear Caliper Oil Tube Length: 155cm - ⚠️❗️TAKE NOTE - ONLY REAR HOSE IS NOT INSTALLED - COMES WITH OLIVE N INSERT 

Dcbikes Product Features :

Suitable for Mountain Bikes Am Downhill DH Folding Ebike etc

Two-way brake system: Pushed by 4 pistons,the bike brake pads will clamp the disc rotor to brake from both side,which prevent the rotor from deformation so as to prolong its life

Left/Right brake lever fit for 22.2mm handlebar.
Hydraulic 4 pistons and two-way brake prolong the life of rotor.
Integrated brake lever and oil tube prevent oil leak.
Suitable for most mountain bikes

Specifications :

Mineral oil system 

Pads Model:  Similar like Shimano Saint Zee

Front adapter 180 & Rear adapter 160
Material: Aluminum alloy + Magnesium 
Right Lever- Front Caliper Oil Tube Length: 800 mm
Right Lever - Rear Caliper Oil Tube Length: 1550mm
Applicable Handle Diameter: 22.2 mm
Applicable Rotors Size: 160 mm / 180 mm
Package Weight: 508g 

Package Includes :
1 X New Front Hydraulic Brake Caliper Hose + Lever
1 X New Rear Hydraulic Brake Caliper Hose + Lever 
4 X New Long Screw + 1 New Olive + 1 New Insert 

⚠️ Note 🌟 No retail packaging  

Buy IIIPRO Mountain Bike Bicycle Downhill Freeride Hydraulic Brakes, Components & Accessories From Dcbikes®️ Online Bike Store www.dcbikes.com.sg | Singapore's Favourite & Number 1 Best Choice For Mountain Bike Components, Bicycle Parts Shop

M4 Power 4 Pistons Hydraulic Calipers Disc Brake Front Rear Hydraulic Two Way System Left Right Brake Lever Set For Bicycle 

🌟 Left Lever- Front Caliper Oil Tube Length: 78cm
🌟 Right Lever - Rear Caliper Oil Tube Length: 142cm

Dcbikes Product Features :
Two-way brake system: Pushed by 4 pistons,the bike brake pads will clamp the disc rotor to brake from both side,which prevent the rotor from deformation so as to prolong its life

Left/Right brake lever fit for 22.2mm handlebar.
Hydraulic 4 pistons and two-way brake prolong the life of rotor.
Integrated brake lever and oil tube prevent oil leak.
Suitable for most mountain bikes

Specifications :

Mineral oil system 

Pads Model:  Similar like Shimano Saint Zee

Front adapter 180 & Rear adapter 160
Material: Aluminum alloy + Stainless steel
Right Lever- Front Caliper Oil Tube Length: 780 mm
Right Lever - Rear Caliper Oil Tube Length: 1420mm
Applicable Handle Diameter: 22.2 mm
Applicable Rotors Size: 160 mm / 180 mm
Package Weight:700g / 24.7 oz

Package Includes :
1 X New Front Hydraulic Brake Caliper Hose + Lever
1 X New Rear Hydraulic Brake Caliper Hose + Lever 
4 X New Long Screw

⚠️ Note 🌟 No retail packaging  

Buy Mountain Bike Bicycle Downhill Freeride Hydraulic Brakes,  Components & Accessories From Dcbikes®️ Online Bike Store www.dcbikes.com.sg | Singapore's Favourite & Number 1 Best Choice For Mountain Bike Components, Bicycle Parts Shop

The Magura Hydraulic Brakeset 

Made in Taiwan

MT2 / MT4 / MT5 / MT5e / MT7 Pro / MT8 / V Brake H33R

This new Magura MT (Mission Team) which is characterized by the use of the method on the caliper Carbotecture in order to save weight. But this is not the only new ...

Class adapted for use on cycles, motorcycle racing's proven 4-piston technology creates an absolute maximum of braking force. No matter how difficult the trail terrain, our 4-piston technology and novel new ergonomics in the brake lever give you a performance package which will fill you with confidence. The MT5 is also perfect for S-Pedelecs. The aluminium, two-finger brake levers are ergonomically perfect for your hands, allowing you to easily and accurately apply the braking power you need, even during long braking actions. Our use of Carbotecture® technology in the brake handle housing keeps the MT5's weight down to a minimum and provides optimal braking performance.

The levers

Magura has developed a new material the Carbotecture, manufacturing process-based carbon in a thermoplastic matrix for maximum soliditié.

The levers are ambidextrous, mounting is possible right and left.

The levers are henceforth have a new, more ergonomic shape.

The MT has a trimming guard lever via a screw T25

Maintenance is a simple game since children and single Torx T25 only for installation and purging.

ergonomic, 2-finger, aluminium brake lever

Carbotecture® SL housing & handlebar clamp

adjustable lever reach 

The Caliper

Forged, 2/4-piston brake calliper with banjo

All screws with Torx T25

MagnetiXchange brake pistons for easy brake pad replacement

Compatible with all MAGURA Storm and Storm SL discs

It is made of aluminum (cast aluminum heat) in two parts bolted. Its open platform facilitates heat dissipation.

Adjustable hose

New gaskets associated with the shape of the pistons ensure they return to the same position in the mud or gel.

Originally format postmount it comes without adapator.

Platelets

Pads Magura Endurance 7.2

Associated with platelet magura, brakes are quieter

⚠️ Note 🌟 Prices For Left & Right Levers + Hose Length: 220cm - Filled With Magura Blood Mineral Oil

⚠️Note 🌟 1 Piece Colour Ring For 2/4 Pistons ( Leave A Note For Colour ) 1 for $10

Comes with olive + Inserts

Note 🌟 Disc & adapters not included 

Weight : From 570g with plastic packaging

1 box size Diameter  - 29cm X 22cm X 8.5cm - 970g

Package Includes :

1 X New Set of Magura Hydraulic Disc Brakeset

( Left + Right with 2 Calipers )

Buy Magura Components & Accessories From Dcbikes® Online Bike Store www.dcbikes.com.sg | Singapore's Best Choice For Mountain Bike, Bicycle Parts Components & Accessories Shop

IIIPRO Cable Actuated Hydraulic Calipers

2 models : 

🌟 For Mountain Bike post mount frame or fork

🌟 For Road bike, flat-mounted double-sided drive frame or fork 

Front and rear caliper with 1 adapter

Suitable for 140MM disc. Other size need to change the flat Mount adapters. Double-sided drive cable wire clamp Installation

Dimensions: Shimano standard, front 70mm, rear 34mm. Front brake: with mounting seat, suitable for 140mm disc

Rear brake: without mounting seat flat Mount adapter.

Mechanical disc brake, oil clamp Double-sided synchronous drive CNC machining, ultra light weight Efficient braking and precision control

Easy to adjust and install.  

Compatible Bike Type : Folding Bike, Fat Bike, Recumbent Bike, Kids Bike, Trekking Bike, Hardtail Bike, Mountain Bike, Cruiser, Dirt Jumper, Road Bike, Electric Bike, Cyclocross Bike, Downhill Bike, Gravel Bike, Tandem Bike

Check pictures for specifications etc

Dcbikes Product Features :

🌟 Flat Mount Caliper Colours : Red Or Black

🌟 Post Mount Caliper Colour : Black

Type: Line Pulling Hydraulic Disc Brake Road Bike

Brand: IIIPRO

Model: For Road Bike, CX Road, Gravel Cyclocross with flat Mount or post mount etc

Material: Aluminium Alloy

Mechanical disc brake, hydraulic clamp

Double-sided synchronous drive

CNC machining, ultra-light weight

Efficient braking and precision control

Easy to adjust installation

Bleeding tools and brake pads use the same as Shimano 

Weight : About 349g/pair - Post Mount

Weight: About 280g/pair - Flat Mount 

Package Includes :

2 X New Prodisk 2 Piston Cable Actuated Hydraulic Disc Brake Calipers

⚠ Note 🌟 No retail packaging 

⚠ Note 🌟 No Bolts, Calipers only as picture 

Buy IIIPro Brake Calipers Components & Accessories From Dcbikes® Online Bike Store In Singapore. www.dcbikes.com.sg | The No 1 Choice For Mountain Bike, Bicycle Parts Components & Accessories Shop

Shimano SLX BR-M7100 Disc Brake Set

Made in Japan 

Comes with ice tech brake pads! 

The SLX BR-M7100 hydraulic 2-piston disc brake with 2-finger brake lever from Shimano fits seamlessly into the line-up of the new SLX M7100 component group. Higher braking force with less effort on the fingers and extremely linear response to the lever movement.

Robust 2-piston disc brake set for XC and marathon racers: Shimano SLX BR-M7100

Expanding SHIMANO’s legendary mountain bike braking technology to more riders, SLX increases braking performance and includes both 2-piston and 4-piston calipers to deliver the right amount of power for a variety of terrain and riding styles. The SLX M7100 brake levers are designed after XTR M9100 and DEORE XT M8100 with more inboard clamp position and added bracing for increased efficiency and control. The new design minimizes impact on cockpit real estate, creating space between the clamp and support point for mounting other handlebar accessories. 

After setting the benchmark in mountain bike components with SHIMANO XTR M9100 and new DEORE XT M8100, Shimano rounds out its now entirely 12-speed performance mountain bike component lines with new SLX M7100. SLX M7100 cascades technology from new XTR M9100 and DEORE XT M8100 - namely Shimano’s signature premium shifting and braking performance - while maintaining the SLX hallmark of value and durability. 

Features - SLX BR-M7100 2-Piston Disc Brake Set

Quicker rebound between actions maintains rider concentration

Greater flexibility and action-optimized cockpit layout

Update brake lever shape

Seamless operation

High rigidity

2-Piston Caliper Brake

Caliper for Postmount Brake

Optimized ergonomic 2-finger brake lever

One-Way bleeding

I-Spec EV compatible - securing the shift lever on the brake lever

SM-RT70 Centerlock rotors in 140, 160, 180, 203mm are available separately!

Dcbikes Product features

Use: MTB

Group: SLX M7100

Model: BR-M7100 (front+rear)

Brake type: Hydraulic Disc-Brake

Brake lever: BL-M7100

Lever length: 2-Finger

Mount: left + right

Clamp: open

Reach adjustment: Yes, without tool

Caliper: BR-M7100 (2-Piston)

Brake mounting: Postmount

Brake pads: G03S Resin with Fin

Brake hose: SM-BH90-SBM

Brake hose lengths: Front left 88mm + rear 1580mm (shortable)

Cable connection: Straight brake lever / Straight caliper

One-Way bleeding: Yes

Brake fluid: Mineral oil

Recommended brake rotor: SM-RT70

Material

Lever: Aluminum Anodized

Caliper: Aluminum Painted

Weight 

Front approx. 260g (without Rotor and Adapter)

Rear approx. 280g (without Rotor and Adapter)

Package Includes :

1 X New left & Right set of Shimano SLX BR-M7100 2 Pistons MTB Hydraulic Brakeset 

⚠ Note 🌟 No retail packaging

Buy Shimano Components & Accessories From Dcbikes® Online Bike Store In Singapore | The No 1 Choice For Mountain Bike, Bicycle Parts Components & Accessories Shop

Shimano XTR BR-M 9100 Disc Brakeset

Made in Japan 

The Shimano XTR BR-M9100 hydraulic 2-piston disc brake with 2-finger carbon brake lever, fits seamlessly into the line-up of the new XTR M9100 component group. Higher braking force with less effort on the fingers and extremely linear response to the lever movement.

Robust 2-piston disc brake set for XC and marathon racers: Shimano XTR BR-M9100

Starting from a brake system, which was already the benchmark for mountain bike brake systems, the SHIMANO engineers revised the design of the new brake levers (BL-M9100/9120). Both the clamp and the lever body itself have been modified. The clamp moves further into the middle of the lever and is angled. This cleverly supports the outer end of the expansion tank directly on the handlebar and creates an additional abutment when the lever is actuated. This significantly increases stiffness and stability, which ultimately leads to an even more direct braking feel and improved controllability. 

The two-piston brake (BR-M9100) comes in combination with a light XC brake lever, whose grip width is of course individually adjustable. The four-piston brake (BR-M9120) recalls its immense potential in combination with a special SERVO-WAVE brake lever (BL-M9120), whose grip width can also be adjusted without tools and which also has an adjustment option for the free travel. Both calipers have a one-piece aluminum design and are combined with highly rigid brake lines, so that the new XTR brake systems score with significantly faster response and less free travel.  

The brake pads and brake discs have also been revised to match the newly developed brake calipers. On the other hand, the pads without Kührippen ensure good deceleration with low weight. The design of the brake discs is a further development of the successful ICE TECHNOLOGIES FREEZA design. While the further weight reduction of 5g and 10g is particularly attractive for the 140mm and 160mm discs, the 180mm and 203mm versions are characterised by a further improvement in heat dissipation of 20°C in intensive tests and are also pleasantly low-weight (203mm: minus 30g).

Features - XTR BR-M9100 2-Piston Disc Brake Set

Quicker rebound between actions maintains rider concentration

Greater flexibility and action-optimized cockpit layout

Update brake lever shape

Seamless operation

High rigidity

High-performance brake control

High power

2-Piston Caliper

Brake Caliper for Postmount Brake

New high rigidity brake hose and 1-piece aluminum caliper

Optimized ergonomic 2-finger brake lever

One-Way bleeding

I-Spec EV compatible - securing the shift lever on the brake lever

Product features

Use: MTB

Group: XTR M9100

Model: BR-M9100 (front+rear)

Brake type: Hydraulic Disc-Brake

Brake lever: BL-M9100

Lever length: 2-Finger

Mount: left + right

Clamp: open

Reach adjustment: Yes, with tool

Caliper: BR-M9100 (2-Piston)

Brake mounting: Postmount

Brake pads: K02Ti Resin without Fin

Brake hose: SM-BH90-SS

Brake hose lengths: front 900mm + rear 1600mm (shortable)

Cable connection: Straight brake lever / Straight caliper

One-Way bleeding: Yes

Brake fluid: Mineral oil

Recommended brake rotor: RT-MT900

Material

Lever: Carbon

Caliper: Aluminium

Weight 

from approx 312g (kit for front 800mm, w/160mm RT-MT900, w/o adapter, w/2bolts, w/Resin pad)

Package Includes :

2 X New Brake levers BL-M9100 left + right

2 X New Brake calipers BR-M9100 (2-Piston)

2 X Brake hoses SM-BH90-SS 900mm + 1600mm long (shortable)

2 Brake pads K02Ti Resin without Fin

4 Screws for brake caliper

Disc brakes are ready for installation, completely assembled and bleeded!

⚠ Note 🌟 No Retail packaging, No Rotors and No Adapters not included!

Buy XTR Components & Accessories From Dcbikes® Online Bike Store In Singapore. www.dcbikes.com.sg | The No 1 Choice For Mountain Bike, Bicycle Parts Components & Accessories Shop 

Shimano BR-UR300 + BL-MT200 disc brake set - flat mount Brakeset 

The Shimano BR-UR300 + BL-MT200 disc brake set comes with flat-mount calipers and two 3-finger brake levers. The flat-mount design - known for a long time from the racing bike sector - ensures a tidy integrated look and simple installation without adapters. Of course, the release unit can also be properly bled without any problems using One Way Bleeding. The width of the brake handles can be adjusted with a tool to fit smaller hands. Overall, the braking performance of the 2-piston brake set is adapted to the needs of MTB beginners or the requirements on tour and in city traffic.

Dcbikes Product Features :

- Direct mount without adapter

- Ample braking power and braking performance for beginners

- Reduced rattling noises of the brake hoses

- Tidy integrated look

- Small hands can easily reach lever

- Resin pistons

- Recommended brake disc: (160 mm only)

- Painted brake calliper, steel bolts (5 mm)

- Funnel bleeding

- Lever and body painted, steel clamp bolt

Technology:

One-Way-Bleeding

One-Way Bleeding is designed to quickly and easily prevent air from entering the hydraulic system. Shimano has optimised the brake fluid flow path throughout the system to prevent air bubbles from being trapped in the system.

One way oil routing plus a funnel tool with mineral oil provides an easy and clean bleeding system.

Specifications:

Application: Cross Country, City & Touring, City

Type: hydraulic, 2 pistons

Actuation: mineral oil

Hose: SM-BH59-JK-SS

Line Length (Front/Rear): 1000 mm/1700 mm

Technical Information - Calliper:

Calliper Mount: flat mount

Pistons: 2

Pads: B01S resin

Design: 2-piece

Calliper Material: aluminium

Hose Connection: straight

Technical Information - Lever:

Lever Length: 3-finger

Adjustment Options: reach adjust (with tools)

Installation: clamp (closed)

Design: right (side-specific), left (side-specific)

Brake Lever Material: Steel

Brake Lever Housing Material: aluminium

Hose Connection: straight

Package Includes :

1 X New Set of Hydraulic Brakes

Buy Shimano Components & Accessories From Dcbikes® Online Bike Store www.dcbikes.com.sg | Singapore's Best Choice For Mountain Bike, Bicycle Parts Components & Accessories Shop

Shimano BR-M8020 XT 4 Pistons Brakeset + Ice Tech Sharkfin Pads

Made in Japan

Providing as much as a 20% increase in braking power as well as much improved heat dissipation compared to the 2 pot BR-M8000 XT brake, the Shimano BR-M8020 XT 4 Pot Disc Brake offers high performance stopping power for aggressive trail, enduro and e-bike riders. Supplied fully bled and ready to shred, this package includes the XT M8000 lever that is compatible with all I-Spec-II shifters.

Dcbikes Product Features :

Front brake = Left lever ( Hose Length 85cm )

Rear Brake = Right Lever ( Hose Length 155cm )

Caliper/Lever Material: Aluminium

Piston Material: Ceramic

Hardware Material: Steel

Lever: BL-M8000, I-Spec II compatible

Caliper: BR-M8020 4 pot

Pads: H01A Resin with cooling fins

Hose: SM-BH90-SBLS

Brake Fluid: Shimano mineral oil

Recommended Rotor: SM-RT81, SM-RT99, RT-EM800 or RT-EM900 (not included)

20% more stopping power that 2 pot BR-M8000 XT brakes

Better heat dissipation for better performance during prolonged braking

Package Includes :

1 set of New Shimano BR-M8020 XT 4 Pot Brakeset + Ice Tech Sharkfin Pads (Front and Rear Brakes) as picture

⚠️ Note 🌟 No retail packaging

Shimano DEORE BR-M6120 Disc Brake Set

Product of Japan 

Made in Malaysia 

The DEORE BR-M6120 hydraulic 4-piston disc brake with 2-finger brake lever from Shimano fits seamlessly into the line-up of the new DEORE M6100 component group. Higher braking force with less effort on the fingers and extremely linear response to the lever movement.

4-piston disc brake with excellent braking power: DEORE BR-M6120 from Shimano

Molded from the same DNA as XTR, DEORE XT and SLX, the new M6100 series delivers Shimano’s proven 12-speed technologies at DEORE level.

The DEORE M6100 brakes come in either an XC-specific two piston caliper or the trail/enduro four piston variant, both with a redesigned brake lever resulting in a stiffer mount, for better feedback and more power. The brake levers are equipped with Shimano’s proven SERVO WAVE technology which results in quicker pad/rotor engagement, improved power and a shorter free stroke.

Dcbikes Product Features :

Shimano DEORE BR-M6120 4-Piston Disc Brake Set

Quicker rebound between actions maintains rider concentration

Greater flexibility and action-optimized cockpit layout

Update brake lever shape

Seamless operation

High rigidity

4-Piston Caliper Brake

Caliper for Postmount Brake

Optimized ergonomic 2-finger brake lever

One-Way bleeding

I-Spec EV compatible - securing the shift lever on the brake lever

Rotors in 160, 180, 203mm are available separately!

Use: MTB

Group: DEORE M6100

Model: BR-M6120 (front+rear)

Brake type: Hydraulic Disc-Brake

Brake lever: BL-M6100

Lever length: 2-Finger

Mount: left + right

Clamp: open

Mounting system: I-Spec EV (I-Spec EV is not compatible with I-Spec II and I-Spec B shifters!)

Reach adjustment: Yes, with tool

Caliper: BR-M6120 (4-Piston)

Brake mounting: Postmount

Brake pads: D03S Resin without Fin

Brake hose: SM-BH90-SS

Brake hose lengths:

Front - Left Lever 900mm + Rear - Right Lever 1600mm (shortable)

Cable connection: Straight brake lever / Straight caliper

One-Way bleeding: Yes

Brake fluid: Mineral oil

Recommended brake rotor: SM-RT64, SM-RT66

Material

Lever: Aluminum Anodized

Caliper: Aluminum Painted

Package Includes :

1 X New Set of Shimano Deore 4 Pistons BR-M6120 MTB Disc Brakeset 

Note 🌟 Brand new in plastic. No retail packaging 

Buy Shimano Components & Accessories From Dcbikes® Online Bike Store www.dcbikes.com.sg | Singapore's Best Choice For Mountain Bike, Bicycle Parts Components & Accessories Shop

Shimano Deore BR-M 6100 XC Race Hydraulic Disc Brake 

Product of Japan

Made in Malaysia 

Shimano Deore M6100, M5100 & M4100

After the mountain bike flagship XTR has already set benchmarks and Deore XT and SLX have followed suit, the Deore M6100 now rounds off Shimano's 12-speed lineup. It is complemented by the components of the M5100 and M4100 series which will equip 11- and 10-speed drivetrains at the same high level.

Regarding the price, the current Shimano Deore groups are positioned in the entry-level range, but are not prepared to compromise in terms of performance, quality and reliability. Almost everything that the high end groups XTR, XT and SLX have to offer in terms of technology, innovation, performance and range of functions, you will find in the Deore components, too.

Shimano Deore M6100 brake set consisting of the BL-M6100 SERVOWAVE brake lever and the light BR-M6100 2-piston caliper for Cross Country use. The result of the combination is a solid brake performance in any condition. Trouble-free maintenance is provided by the proven One Way Bleeding concept and the Easy Hose Joint System which simplifies brake hose exchanges.

Dcbikes Product Features :

Right Lever = Rear Brakes 160cm

Left Lever = Front Brakes 90cm

J-Kit (Easy Hose Joint System)

At brake systems with J-Kit hose joint the brake lever features an integrated olive what makes an easy brake hose installation and removal possible.

Shimano Deore BL-M6100 brake lever

The hydraulic Deore BL-M6100 brake lever is characterized by Shimano's SERVOWAVE technology which improves the lever's modulation ability. Because the brake lever absorbs a lot of braking distance right at the start of its movement, the brake pads have disc contact more quickly and it remains more lever travel to adjust braking force. That is why SERVO WAVE brake systems are characterized by faster response, higher performance and shorter idle travel.

The 2-finger brake lever's construction is inspired by XTR, Deore XT and SLX series, so the clamp is not mounted parallel, but with an angle to the handlebar creating a second contact point which provides significantly increased stiffness. For individual customizability, the lever is equipped with an integrated, tool-based reach adjustment option. Thanks to the I-Spec EV design the Deore SL-M6100-I shifting levers can be mounted directly to the brake lever.

Shimano Deore BR-M6100 disc brake caliper

With its 2-piston construction, the Shimano Deore BR-M6100 Postmount brake caliper is perfect for Cross Country use. The G03S Resin brake pads in combination with the light caliper guarantee extremely good deceleration.

Weight : 652g

Package Includes :

1 X New Set of Shimano Deore BR-M6100 XC Race Hydraulic Disc Brakeset 

⚠️ Note 🌟 No retail packaging 

Buy Shimano Components & Accessories From Dcbikes® Online Bike Store www.dcbikes.com.sg | Singapore's Best Choice For Mountain Bike, Bicycle Parts Components & Accessories Shop

Shimano Hydraulic Disc Bicycle Brake set

Dcbikes Product Features :

⚠️ Note 🌟 Brake caliper adapter is not included 

Model: MT200

Color: Black

Front Cable: 750mm Left lever = front brakes

Rear Cable: 1350mm Right lever = Rear brakes

⚠ Other length, Please choose from the options available 

⚠ 1 set of brakes levers , calipers, hoses , original Shimano pads . 1 adapter and bolts are included

Left for rear caliper

Rught levers for rear caliper 

Front & rear calipers  

Pre-filled with brake oil

Ready to use

Weight: 630g/set

Package Includes :

1 set of New Shimano Front and Rear Brake Set

⚠ Note 🌟 No retail packaging 

Buy Shimano Components & Accessories From Dcbikes® Online Bike Store In Singapore | The No 1 Choice For Mountain Bike, Bicycle Parts Components & Accessories Shop

Shimano Saint BL-M820 + BR-M820 Hydraulic Disc Brake - I-Spec B Bar Clamp

Made in Japan 

Shimano Saint M820 - Pure Gravity

With its unrivalled durability, stability and ergonomics, the Shimano Saint M820 is champions' first choice. Accordingly the components which are built for the eager Downhill racer, let you accelerate and decelerate at World Cup level. A super stable and silent drivetrain as well as powerful and responsive brakes make the Saint a real Downhill race weapon.

Shimano Saint M820 brake set consisting of the BL-M820 SERVOWAVE brake lever and the powerful BR-M820 4-piston caliper for Downhill use. Trouble-free maintenance is provided by the proven One Way Bleeding concept and the Easy Hose Joint System which simplifies brake hose exchanges.

J-Kit (Easy Hose Joint System)

At brake systems with J-Kit hose joint the brake lever features an integrated olive what makes an easy brake hose installation and removal possible.

Shimano SSaint BL-M820-B brake lever

The world's best gravity riders rely on Shimano Saint brakes to deliver ultimate stopping power and nuanced modulation no matter the conditions. Thanks to an ergonomic, antiskid shape, the BL-M820 SERVOWAVE levers guarantee sure braking even in the roughest terrain. In addition the 2-finger levers feature tool-free reach and free stroke adjustment. Equipped with the integrated I-Spec B mounting system for a compact attachment of compatible shifting levers.

SERVOWAVE

Shimano's SERVOWAVE technology improves brake lever's modulation ability. Because the lever absorbs a lot of braking distance right at the start of its movement, the brake pads have disc contact more quickly and it remains more lever travel to adjust braking force. That is why SERVO WAVE brake systems are characterized by faster response, higher performance and shorter idle travel.

Shimano Saint BR-M820 disc brake caliper

With its 4-piston construction, the Shimano Saint BR-M820 Postmount brake caliper meets perfectly the demands of Gravity and Downhill riding. The H03C Metal brake pads with Ice-Tech cooling fins in combination with the powerful 4-piston caliper made of ceramic guarantee an extremely good heat management what results in excellent deceleration.

Ice Technologies

The fading which can occur to disc brake rotor and pad when braking on a long downhill ride for instance, has a negative impact on the braking performance. Shimano has adopted Ice-Tech disc brake rotor and brake pad to realize the cooling technology for consistent performance. The disc brake rotor blade which has a 3 layer-sandwich structure of stainless steel, aluminum and stainless steel, provides better radiation performance achieving a lower surface temperature. Aluminium cooling fins have been adopted the brake pad improving the radiation performance even further. In combination the disc brake rotor blade and the radiator fin provide long pad life, less noise, less fade and lightweight.

Please pay attention to the maximum permitted disc diameter depending on your fork or frame.

Brake hose: SM-BH90-SBLS

Left Lever - Front Brakes 980mm 

Right Lever - Rear Brakes 1680mm

Brake lever: BL-M820 (left + right version)

Brake pads: Cooling fins (included)

Each with cooling fins (optional)

Disc: recommended: SM-RT86, SM-RT99 (not included)

Included in delivery: hydraulic disc brake set, filled and bleed:

2 BL-M820 brake levers, left / right

2 BR-M820 calipers incl. brake pads

2 SM-BH90-SBLS brake hoses, 1000 / 1700 mm

Material: lever: aluminium (anodized)

master cylinder, caliper: aluminium (painted)

piston: ceramic

Weight supplement: FW set incl. 160 mm disc | manufacturer's specs 652g

Package Includes :

1 X New set of Saint Brakes

⚠ Note 🌟 No retail packaging 

Buy Shimano Components & Accessories From Dcbikes® Online Bike Store www.dcbikes.com.sg | Singapore's Best Choice For Mountain Bike, Bicycle Parts Components & Accessories Shop

Shimano SLX BR-M7120 Disc Brake Set

Made in Japan 

The SLX BR-M7120 hydraulic 4-piston disc brake with 2-finger brake lever from Shimano fits seamlessly into the line-up of the new SLX M7100 component group. Higher braking force with less effort on the fingers and extremely linear response to the lever movement.

4-piston disc brake with excellent braking power for front and rear: Shimano SLX BR-M7120

Expanding SHIMANO’s legendary mountain bike braking technology to more riders, SLX increases braking performance and includes both 2-piston and 4-piston calipers to deliver the right amount of power for a variety of terrain and riding styles. The SLX M7100 brake levers are designed after XTR M9100 and DEORE XT M8100 with more inboard clamp position and added bracing for increased efficiency and control. The new design minimizes impact on cockpit real estate, creating space between the clamp and support point for mounting other handlebar accessories. 

After setting the benchmark in mountain bike components with SHIMANO XTR M9100 and new DEORE XT M8100, Shimano rounds out its now entirely 12-speed performance mountain bike component lines with new SLX M7100. SLX M7100 cascades technology from new XTR M9100 and DEORE XT M8100 - namely Shimano’s signature premium shifting and braking performance - while maintaining the SLX hallmark of value and durability. 

Features - SLX BR-M7120 4-Piston Disc Brake Set

Quicker rebound between actions maintains rider concentration

Greater flexibility and action-optimized cockpit layout

Update brake lever shape

Seamless operation

High rigidity

4-Piston Caliper Brake

Caliper for Postmount Brake

Optimized ergonomic 2-finger brake lever

One-Way bleeding

I-Spec EV compatible - securing the shift lever on the brake lever

SM-RT70 Centerlock rotors in 140, 160, 180, 203mm are available separately!

Dcbikes Product features

Use: MTB

Group: SLX M7100

Model: BR-M7120 (front+rear)

Brake type: Hydraulic Disc-Brake

Brake lever: BL-M7100

Lever length: 2-Finger

Mount: left + right

Clamp: open

Reach adjustment: Yes, without tool

Caliper: BR-M7120 (4-Piston)

Brake mounting: Postmount

Brake pads: N03A Resin with Fin

Brake hose: SM-BH90-SBM

Brake hose lengths: Front left 880mm + rear right 1580mm (shortable)

Cable connection: Straight brake lever / Straight caliper

One-Way bleeding: Yes

Brake fluid: Mineral oil

Recommended brake rotor: SM-RT70

Material

Lever: Aluminum Anodized

Caliper: Aluminum Painted

Weight 

Front approx. 285g (without Rotor and Adapter)

Rear approx. 299g (without Rotor and Adapter)

Package Includes :

1 X New left & Right set of Shimano SLX BR-M7120 4 Pistons MTB Hydraulic Brakeset + Ice Tech Brake Pads 

⚠ Note 🌟 No retail packaging

Buy Shimano Components & Accessories From Dcbikes® Online Bike Store In Singapore. www.dcbikes.com.sg | The No 1 Choice For Mountain Bike, Bicycle Parts Components & Accessories Shop 

Shimano XT M8000 Disc Brakes

Made in Japan

Comes complete whole Brake set

 ( Front and Rear ) - plug and play. Ready to race. Without disk brake Rotors, bolts and adapters ( Sold separately ) 

Shimano's XT M8000 Disc Brake is powerful and fully-bled to deliver superb stopping prowess in all conditions. The fully-bled lever and caliper comes without adapters or rotors, which gives you the freedom to customise your bike for the ideal riding experience.

Ride Aggressively with XT M8000 Disc Brake

Featuring a short stroke Servo-Wave mechanism for quick pad engagement, this setup allow you to ride as agressively and powerfully as the trail demands. A shim-less mounting system means the installation and setup process is quick and easy. Complete with cversized 22mm twin phenolic pistons that have been optimised to save weight, insualte from heat, and deliver a stiff performance

Dcbikes Product Features :

Brake Lever: 2 Finger, Forged Alloy

Brake Pads : Aftermarket Metal compound for ultimate performance 

Reach Adjuster: Yes

Servo Wave Action Power Adjuster: Yes

Brake Hose Type: SM-BH90-SBM

Calliper Mount Type: Hydraulic Disc Brake

Piston Type: 2

Mount: Hinged clamp for quick installation, I-spec-II compatible

Recommendation: Use with Ice Tech rotors for optimum braking performance (not supplied)

Front - Left Lever (80cm)

Rear - Right Lever (160cm)

Or 

Front - Left Lever ( 85cm ) 

Rear - Right Lever ( 165cm )

Package Includes :

1 X New Set Front and Rear Shimano XT M8000 MTB Hydraulic Brakes 

⚠ Note 🌟 No retail packaging

Buy Shimano Components & Accessories From Dcbikes® Online Bike Store In Singapore. www.dcbikes.com.sg | The No 1 Choice For Mountain Bike, Bicycle Parts Components & Accessories Shop

Shimano XT BR-M8100 Disc Brake Set

Made in Japan

Option For hose length

Left lever - Front hose 75cm / Right Lever - Rear hose 140cm

OR 

Left lever - Front hose 80cm / Right Lever - Rear hose 148cm

Focus on the trail

Shimano XT BR-M8100 (L + R) is a two-piston disc brake set with ice tech brake pads especially for all mountain and cross-country use. The calipers are characterized by excellent brake control and a simple connection system. The I-Spec EV compatible BL-M8100 brake levers are mounted at an angle, resulting in an additional contact point. This increases rigidity and provides more direct feedback. In addition, Shimano Servo Wave boosts the braking performance: with shorter idle travel, more performance is available.

Specifications:

Series: Deore XT M8100 

Application: AM Cross Country Brake Type 

: Hydraulic, 2-Piston Brake Medium 

: Mineral Oil 

Line: SM-BH90-SBM 

Line Length VR / HR: 780 mm / 1480 mm

Specification Brake Caliper:

Assembly Brake Caliper: Postmount 

Piston: 2 

Brake Pad : ice Tech Resin 

Construction: 2-piece 

Material Brake Caliper: Aluminum Pipe Connection 

: Banjo

Technical data brake handle:

Lever length: 2-fingers 

Setting options: Reach adjustment (tools), Point Adjustment 

Assembly: clamp (divided), I-Spec EV 

Design: right (side-specific), left (side-specific) 

Material brake lever: aluminum 

Material brake handle: aluminum 

Cable connection: straight

Features:

- excellent brake control helps focus on the trail 

- lightweight 2-piston system 

- easy and fast setup 

- optimized lever axis position with additional contact point and revised ergonomics 

- flexible, action-optimized cockpit layout thanks to I-Spec EV 

- 10% stiffer than M8000 even in heat 

- faster braking with shorter free travel 

- piston made of ceramic 

- IS mounting with adapter possible 

- Recommended brake disc: RT-MT800/Rt81/Rt86

- Painted brake caliper, steel mounting 

screw (5 mm) - funnel vent 

- Anodized brake lever, painted housing, stainless steel -Klemmschraube

Technologies:

Servo Wave

The Servo Wave brake lever absorbs a large amount of braking distance at the beginning of its movement, so that the pads can be guided to the brake disc with a small lever travel. After application of the brake lining, the force transmission factor increases rapidly. The greater part of the lever travel is thus still available to increase the braking force and to dose more targeted. 

I-Spec EV

With the I-Spec EV construction, the Shimano shifter can be mounted directly on the brake lever, eliminating the need for a clamp and significantly increasing the adjustment range. 14 mm are available with I-Spec EV for longitudinal adjustment, 20 ° for adjustment in the direction of rotation, so that each driver can make a setup that suits his or her individual anatomy or preferences. I-Spec EV handles are not compatible with older I-Spec systems. 

One-Way Venting

One-way venting is designed to quickly and easily prevent air from being in the hydraulic system. Shimano has optimized the brake fluid path throughout the system to prevent air bubbles from entering the system.

The brake fluid path in only one direction, together with the hopper for filling the mineral oil, allows for clean, trouble-free bleeding. 

Ice-Tech

Fading the brake during prolonged uninterrupted operation, for example in the downhill, affects the braking performance. Shimano has introduced brake discs and brake pads with Ice-Tech technology to provide cooling technology for consistently high braking performance. The brake disc has a three-layer stainless steel sandwich structure around a core made of aluminum. It radiates heat better and reduces, for example, a surface temperature of 400 ° C to 300 ° C. In addition, the brake pads optionally have cooling fins on. The construction of the disc in conjunction with the cooling fins results in a longer service life of the lining, less brake noise, less fading and a lower weight.

Package Includes :

1 X New Set Of Shimano XT M8100 2 Pistons Hydraulic Ice Tech Disc Brakeset (Front & Rear Brakes) 

⚠ Note 🌟 No retail packaging 

Buy Shimano Components & Accessories From Dcbikes® Online Bike Store www.dcbikes.com.sg | Singapore's Best Choice For Mountain Bike, Bicycle Parts Components & Accessories Shop

Sram Code RSC Disc Rear Brake Lever

Made in Taiwan 

Meet the new standard for hard-hitting, heavy-duty braking. We added 15% extra piston power and 30% more volume in the lever reservoir, ensuring peak performance for the full run. And with SwingLink™️ and Lever Pivot Bearing technologies, lever feel remains smooth and progressive, no matter how hard the pull. Go deeper and grab more power.

Dcbikes Product Features :

- Designed specifically for heavy-duty demands.

- Pivot bearing offers crisp lever feel and a fatigue-free ride.

- Metallic pads come standard for more power and longer wear.

Specifications:

- Application (DB):MTB

- Brake type Hydraulic

- Blade material Aluminum - Forged

- Rec MMX clamp (not included):Stainless bolt, blk clmp

- Orientation:Front, Rear

- Pad type (Disc):Steel-backed metal sintered

- Bracket (Disc Brake):Direct mount DIR

- Hose length (mm):1800mm

- Rotor (AM only):n/a

- Pistons:4

- Piston material: Phenolic Plastic

- Rotor typerecommended:1-piece CenterLine

- Clamp Included (DB):n/a

Package Includes:

2 X New SRAM Code RSC disc brake, ready for full and bleed mounting (front wheel + rear wheel)

Front 90 cm rear 200cm ( tbc )

- 1 Pair of SRAM Sintered Metal Brake Pads each

- 1 x SRAM Fixing Clamp each

- 1 x SRAM Transport Security

- incl. Olive + Insertpin

- with fixing screws included

- does not include brake disc

- does not include adapter

Buy Sram Components & Accessories From Dcbikes® Online Bike Store www.dcbikes.com.sg | Singapore's Best Choice For Mountain Bike, Bicycle Parts Components & Accessories Shop

SRAM Level Disc Brake Set

Made in Taiwan 

The SRAM Level brake levels the playing field with power and reliability stuffed into a lightweight package.

New Rules: the Sram Level

This is no-nonsense performer, but don’t let its understated disposition fool you — Level gives you the art of braking in minimalist form.

Technologies

DirectLink™

SRAM’s DirectLink lever design produces a solid, positive feel the second you squeeze the lever to engage the brake It offers a no-nonsense solution to give you precise control.

DOT 5.1™

Heat is an enemy of any brake system, so advancements in heat management mean advancements in your ride. We found that in our systems DOT 5.1 takes almost three times longer to boil than DOT 4, thus allowing flawless, fade-free performance in even more extreme conditions.

Expandable Bladder

SRAM’s new brake lever design includes a reshaped bladder that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it’s needed. The result is improved back-pressure relief, which produces dependable braking power and consistency.

PiggyBack™ Reservoir

The brake fluid reservoir on SRAM’s latest lever design is optimized for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement—so you can switch your levers on the handlebar and run them moto without hassle.

Timing Port Closure

A hydraulic brake’s timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM’s new timing port closure system features durable seals and an ultra-smooth cylinder bore finish, producing dependable braking power and consistency.

Dcbikes Product Features :

Use: MTB Bicycle

Model: Level

Caliper Design: 2-piston caliper

Rotor: G2 (Not included!)

Pad: Organic

Fluid: DOT 5.1

Mount: Ambidextrous

Adjustment: Tool-reach Adjust

Technology Highlight(s): DirectLink™, Expandable Bladder, Timing Port Closure

Pad / Holder: Top-loading Intended

System: Open System

Rotor Sizes: 160, 170, 180, 200mm (Not included!)

Tri-Align Caliper Positioning System: No

Tool-Free Pad Replacement: No

Bend Zone™: Yes

Ambidextrous: Yes

Stainless Hardware: Steel

Hose length:

front 750mm 

rear 1450mm

Plug and play but 🌟 Take note, you may need to extend or shorten the hose length plus rebleed if required 

Material 

Lever: Aluminum

Body: Aluminum

Caliper: Aluminum

Color black-glossy

Weight 860 g (pair)

Package Includes :

1 set of New Front and Rear Sram Level Hydraulic MTB Brakeset

⚠️ Note 🌟 No retail packaging

Buy Sram Components & Accessories From Dcbikes® Online Bike Store www.dcbikes.com.sg | Singapore Favourite Choice For Mountain Bike, Bicycle Parts Components & Accessories Shop

The Sram Level T Brakes 

Made in Taiwan 

Sram capitalizes on the same trail-taming brake technology that conquered the World Mountain Bike Championships, to deliver a powerful and consistent XC and trail-optimized brake set that keeps your capital in the bank. This budget-minded, MatchMaker™ compatible brake set provides all the power of its siblings, keeping you in complete control.

Specifications:

Series: Level T

Application: MTB, Trail, Cross Country

Pistons: 2 (21 mm)

Mount: post mount (IS with adapter)

Hydraulic Fluid: DOT 5.1

Rotor (Centerline) rotor not included

Brake Lever: included

Type: disc brake, hydraulic

Technical Information:

Brake Lever Material: aluminium

Brake Lever Housing: aluminium

Caliper Material: aluminium

Brake Pads: organic

Mount: left or right

Reach Adjust: yes (tools required)

Clamp: split / MatchMaker compatible

Front Hose Length: 850 mm

Rear Hose Length: 1580 mm

Technology: Bleeding Edge™, Direct Link™, DOT 5.1, Expandable Bladder, Heat Shield, PiggyBack™ Reservoir, TPC Plus™

Features:

- based on the Guide disc brake version (with the same pistons, seals and Reservoir), but smaller 

- small brake lever with DirectLink™

- Level TL, TLM und Level Ultimate technologies used

- two bolt clamp

Technology:

DirectLink™:

SRAM's DirectLink lever design produces a solid, positive feel the second you squeeze the lever to engage the brake. It offers a no-nonsense solution to give you precise control.

DOT 5.1:

Heat is an enemy of any brake system, so advancements in heat management mean advancements in your ride. SRAM found that in the systems DOT 5.1 it takes almost three times longer to boil than DOT 4, thus allowing flawless, fade-free performance in even more extreme conditions.

Expandable Bladder:

SRAM's new brake lever design includes a reshaped bladder that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it's needed. The result is improved back-pressure relief, which produces dependable braking power and consistency.

PiggyBack™ Reservoir:

The brake fluid reservoir on SRAM's latest lever design is optimized for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement-so you can switch your levers on the handlebar and run them moto without hassle.

TPC Plus™ (Timing Port Closure):

A hydraulic brake's timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM's new timing port closure system features durable seals and an ultra-smooth cylinder bore finish, producing dependable braking power and consistency.

Model Index:

front / gloss black:

- Type: front wheel

- Brake Hose Length: 900 mm

- Colour: gloss black

- Factory Number: 00.5018.105,000

Rear / Gloss Black:

- Type: rear wheel

- Brake Hose Length: 1750 mm

- Colour: gloss black 

- Factory Number: 00.5018.105,001

Package Includes :

1 X New Set Front & Rear Sram Level T MTB Hydraulic Disc Brakeset (Plug & Play)

⚠️Note 🌟 no retail packaging 

Buy Sram Components & Accessories From Dcbikes® Online Bike Store www.dcbikes.com.sg | Singapore's Best Choice For Mountain Bike, Bicycle Parts Components & Accessories Shop

Tektro HD-M275 Bicycle Hydraulic Brakeset + 2 X 160mm G3 Disc Brakes Rotors 

Made in Taiwan 

G3 Clean Sweep rotor supplied with Tektro brake models (same features as G2 Clean sweep, but updated). Sram G3 Clean Sweep rotor for all Avid, Juicy and Code hydraulic disc brakes: 

100% Universal fitting for all models

⚠️Note🌟Left Lever - Front Caliper Hose 770mm / Right Lever - Rear Caliper Hose 1420mm

Bicycle MTB - M 275 Hydraulic Disc Brake System
◆ Open system, Dual piston
◆ Easy installation, adjustment and maintenance

Dcbikes Product Features :

SPECIFICATIONS

Rotor 1.8mm thickness
Lever Aluminum lever & Cast aluminum bracket
HD-M275 : Reach 86 - 90 mm
HD-M276 : Reach 81 - 85 mm
One piece clamp
2 Finger Blade
Finish : Black
Short reach for Small Hand
Caliper Forged aluminum body
Finish : Black
Pads Low noise resin pad
Easy Replacement
Fluid Non-Corrosive Mineral Oil
Excellent Heat Expansion Properties
Weight Front Wheel - 287 Grams / Rear Wheel - 307 Grams
(Includes 2 X New rotor, adapter & mounting bolts)

Package Includes :

1 X New Left + Right Brakeset and 2 X 160 Disc As Picture

⚠️Note🌟No retail packaging 

Buy Tektro Trp Components & Accessories From Dcbikes®️ Online Bike Store www.dcbikes.com.sg | Singapore's Favourite & Number 1 Best Choice For Mountain Bike Components, Bicycle Parts Shop

Ultra lightweight Titanium Bolts 

Dcbikes Product Features :

Colours : Oil Slick / Gold / Black / Silver

🌟Bolt for Shimano Caliper Hydraulic Oil Filler Injection Bleed Nipple Nut

🌟Old BH90 Banjo Bolt For Brake Caliper 

Suitable for Calipers like Older Shimano Deore M6000 SLX M675 M7000 XT M785 M8000 

🌟New BH90 Banjo Short Bolt For Brake Caliper 

Suitable for Calipers like Shimano Deore M6000 M6120 M7120 XT M8120

Bleed Nipple Bolt Weight : 5g

Banjo Bolt Weight : 15g

Package includes :

1 X Titanium bolt

Buy Titanium Components & Accessories From Dcbikes®️ Online Bike Store www.dcbikes.com.sg | Singapore's Best & Favourite Choice For Mountain Bike Components, Bicycle Parts Shop

ZOOM Red/Black Hydraulic Brake Kit 750/1350 mm Bicycle Front and Rear Brakes 

Model: HB-875

Color: Red / Black 

Dcbikes Product Specifications :

Right Lever = Front Brakes 750mm

Left Lever = Rear Brakes 1350 mm

Material: Aluminum alloy

Brake direction: Left (Rear) / Right (Front)

Scope: MTB / All Mountain Bike / Road Bike / Enduro / Downhill / Freeride / Bicycle / Bmx / Fat Bike / Escooter

Length: front 750mm, rear 1350mm

Weight: about 620 g / set

Package Includes :

1 set of New Zoom Anodized Bicycle Hydraulic Brakeset

Buy Zoom Components & Accessories From Dcbikes® Online Bike Store www.dcbikes.com.sg | Singapore's Best Choice For Mountain Bike, Bicycle Parts Components & Accessories Shop

ZR Flat Bar M1 Brake Levers + XG Flat Mount Hydraulic Brakeset

⚠️Note🌟Brakes are not filled with oil and levers, banjo olive and calipers are not installed. You will need to cut and rebleed it. Bleeding technics are like the usual Shimano brakes 

Aluminium 7075AL Full CNC manufacturing, use short stroke large diameter pistons to provide higher braking sensitivity and stronger braking force.

The integrated oil tank design basically eliminates the problem of oil leakage caused by the aging of the sealant, and the lever rotation point adopts the
bearing design to greatly improve the operating
comfort and smoothness of the brake handle,XG suitable for Flat Bar Gravel Road Bicycle 

In addition, XG calipers are available for are compatible with all mineral oil
MTB brake levers and ROAD hydraulic brake
shifters

The front and rear of the XG version are split
packaging, which is more convenient for the
installation of the built-in cable frame

It was personally tested by the head coach of
China Hong Kong Mountain Bike Team, Zhenxing
Chen (former Asian Championship champion,
Asian Games champion, four-time Olympic
participation record), and it fully meets the
competition standards.

XG brakes are compatible with Shimano
brake levers and most brake levers that use
mineral oil

Dcbikes Product Features :
Brand: ZRACE

Model: M1 XG

Colour : Black

Material : Aluminum Alloy CNC

Scope of use: Gravel Mountain Bike

Oil ド : Mineral oil

Flat Mount Bar Brake Lever : Adjustable

140/160mm flat mount adapters & bolts are included

BH59 2 olives + 2 barbs are included 

Cooling Fin Brake pads are included : Also Compatible with LO05A LO03A L04C
K03S K05S

Tubing length: LEFT-FRONT 780mm / RIGHT-
REAR 1500mm

Weight: 394g a pair

Package Includes :

1 X New Set Of Flat Mount Hydraulic Brakeset 

Buy Zrace Components & Accessories From Dcbikes®️ Online Bike Store www.dcbikes.com.sg | Singapore's Favourite & Number 1 Best Choice For Mountain Bike Components, Bicycle Parts Shop